Kawasaki Z1000ST - Keyster KK-0148NR single carb rebuild kit.
We use and recommend these high quality kits which are manufactured in Japan.
All parts are a high quality reproduction of the original parts.
Fitment
Suitable for the Mikuni VM28 slide carburettors fitted to Kawasaki Z1000ST motorcycles.
Each kit contains:
1 x Cap gasket
1 x Bowl chamber gasket
1 x Float valve set
1 x Jet needle with clip
1 x Needle jet
1 x Air screw with o-ring
1 x 110 Main jet
1 x 15 Pilot jet
1 x Drain screw o-ring
1 x Emulsion tube o-ring
1 x choke plunger o-ring
How to identify your carbs:
- 1205 stamped on the carburettor body
- Has slotted float bowl drain screws which are located on the side of the float bowl bottom
- Side mounted air screws
- Tickover screw at bottom of carbs
** NOT SUITABLE FOR VM CARBS WITH ACCELERATOR PUMPS **
If in doubt, please contact us.
Note: Four kits needed for a full bank of carbs.
