Kawasaki Z1000A2/A4 (MK2) & Z1R - Keyster KK-0147NR carb rebuild kit X4
We use and recommend these high quality kits which are manufactured in Japan.
All parts are a high quality reproduction of the original parts.
Fitment
Suitable for the Mikuni VM28 slide carburettors fitted to Z1000A2/A4 (MK2) & Z1R motorcycles.
Each kit contains:
1 x Cap gasket
1 x Bowl chamber gasket
1 x Float valve set
1 x Jet needle with clip
1 x Needle jet
1 x Air screw with o-ring
1 x 105 Main jet
1 x 15 Pilot jet
1 x Drain screw o-ring
1 x Emulsion tube o-ring
1 x choke plunger o-ring
How to identify your carbs:
- Z1000MK2 (A3 & A4) has 1132 stamped on the carburettor body
- Z1R has 1040A stamped on the carburettor body
- Has slotted float bowl drain screws which are located on the side of the float bowl bottom
- Side mounted air screws
- Tick over screw at bottom of carbs
If in doubt, please contact us.
Note: This is for 4 kits needed for a full bank of 4 carbs.
