•  - Click to enlarge
  •  - Click to enlarge

Tap for gallery


Product Information

Kawasaki Z1000 (1015cc) Piston kit


  • Kawasaki Z1000A1-A2
  • Kawasaki Z1000A3-A4 (MK2)
  • Kawasaki Z1000H
  • Kawasaki Z1000ST
  • Kawasaki Z1000G
  • Kawasaki Z1000Ltd-B1
  • Kawasaki Z1R

This high quality replacement piston kit from IMD includes the following:
4 x Pistons
4 x Ring Sets
4 x Piston Pins
8 x Circlips 

Available in the following sizes - use the dropdown to select:
70.0mm (Standard bore - 1015cc)
70.5mm (+ 0.5mm oversize - 1030cc)
71.0mm (+ 1.0mm oversize - 1045cc)

These piston kits are direct replacements for the OEM/Genuine parts and have the same compression ratio.
The ring sets utilise the 3 piece oil control type offering excellent sealing to the cylinder wall.
All IMD pistons are made from the latest specification silicon aluminium alloy material.
This conforms to the required percentages of specialist metals, the most important of which is silicon. Silicon has been proved conclusively over a prolonged period, to give the best ring groove wear rates coupled with a low coefficient of low expansion rates. Strength has been achieved using a modern construction technique which has allowed the weight to be reduced in the piston. The weight of the piston is the most important factor in engine design, since the effect of reciprocating weight is transferred directly in terms bearing loads, engine balance and maximum permissible speed. The lighter the pistons are, then the lower are the loads on the crankshaft main bearings.
IMD have achieved piston weights comparable with the original parts, and will in the future improve upon this through innovative design.
This reduction of weight is now common place in automotive piston manufacturing worldwide, our pistons conform to this industry practice without any compromise, and are kept to the lowest level concomitant with adequate strength.
Please note: All motorcycle & automotive components supplied from this site/listing must be fitted by a qualified Engineer using the correct appropriate equipment and using the necessary technical information. No liability can be accepted for components incorrectly fitted, or any failure after installation.
Cylinder boring instructions
Piston ring installation instructions

Product CodeIMD1000

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.

Copyright Aire Valley Classics & Quick-Glo UK 2018-2024

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.

Copyright Aire Valley Classics & Quick-Glo UK 2018-2024

eCommerce by CubeCart