Viton float bowl gasket set: Kawasaki Z1 Z1A
Fed up of leaky float bowl gaskets?
The paper gaskets fitted as standard are prone to leaking and failure due to age.
Infrequent usage which causes regular wet/dry cycles accelerate the ageing process causing failure sooner, rather than later,
The solution!
Replace them with our 100% petrol proof viton rubber gaskets.
Manufactured for us in the UK from specially selected petrol proof viton rubber which doesn't swell or shrink and is unaffected by the ethanol in modern fuels.
Fitment
Suitable for the Mikuni VM28SC (type 1470, 1472 & 1473) slide carburettors fitted to Kawasaki Z1 and early Z1A.
Replaces OEM part No: 16019-019
How to identify which version of the Mikuni VM28CS you have:
- Generally these carbs were originally fitted on bikes with VIN Z1E032817 and LOWER
- Has1470, 1472 or 1473 stamped on the carburettor body
- Has large, cast, hexagonal float bowl drain screws
If in doubt, please contact us.
